Changes between Version 12 and Version 13 of ContainmentInSeattle

Changes between Version 12 and Version 13 of ContainmentInSeattle

Please note that these Trac pages are no longer being updated. Wiki contents/documentation have moved to GitHub.

Changes between Version 12 and Version 13 of ContainmentInSeattle

Please note that these Trac pages are no longer being updated. Wiki contents/documentation have moved to GitHub.

Changes between Version 12 and Version 13 of ContainmentInSeattle

Show
Ignore:
Timestamp:
12/20/09 12:43:53 (10 years ago)
Author:
cosminb
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • ContainmentInSeattle

    v12 v13  
    22Please see attached paper for information about Containment in the Seattle Testbed. 
    33 
    4 server startup details coming soon... 
     4server and experiment start details coming soon... 
    55 
     6== Building and Configuring == 
     7Start by creating a directory using preparetest.py. We'll call this directory testdir. 
     81) In testdir, copy all CNC Core Modules, as listed below. If you are planning to run experiments, also copy the CNC experiment modules (listed below) to testdir. 
     9 
     102) A config file must be created that will describe the topology of the containment server farm (Seattle Node Directory Service). It must be named 'cnc_server_list.txt', and must list the information of every server in the farm. Each line describes a different server, and each line must follow this exact format: <server_ip>:<server_port> <server public key> 
     11 
     123) A config file must be created that will describe the backup configuration of the containment server farm (Seattle Node Directory Service). The file must be named 'cnc_backup_config.txt.' If it is left empty, it indicates the server farm should use no backup configuration. This is fine for most experiments. See comments on cncFileParser_read_backup_config in cncFileParser.repy for information on how to specify a backup configuration. 
     13 
     144) Copy 'restrictions.cnc' into the test directory if you are planning to run the Seattle Node Directory Service (cncStandaloneServer.repy is used to run this service). 
     15 
     165) If you are planning to run the Seattle Node Directory Service, copy testdir to every machine in your farm. 
     17 
     18 
     19== Running the Server == 
     20Prior to this section, please complete the steps in the 'Building and Configuring' Section 
     21 
     22<remainder of section coming soon> 
    623 
    724== CNC Core Modules ==